Ga door naar hoofdinhoud

Model No. A1367 / 8, 16, 32, or 64 GB capacity

914 Vragen Bekijk alle
Vraag afgerond

Why is my replaced screen not working correctly?

I cracked the the screen on my iPod touch 4gen so I ordered an new one and put it back together the exact same as it came out. Some times it turns white and some times it doesn't work at all. I don't know what is going on please help.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Try a reset by holding the power and home button together, if it comes back on white or black the screen is defective and requires replacing.

ORIGINAL iPod touch 4th gen screens are available from

Here

Was dit antwoord nuttig?

Score 0

1 Opmerking:

I ordered a new screen and installed it and it worked but did not sit down in the frame flush and the top hold button did not work so I took it apart and re soldered the hold button/ volume cable and now nothing works I was very careful and did not cut any cables or break anything I don't know what happened please help.

Thank you

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 616