Ga door naar hoofdinhoud

Repair and disassembly guides for projectors.

144 Vragen Bekijk alle

Repair/service guide for a Panasonic PT-L500U projector?

My Panasonic PT-L500U projector won't turn on unless you hold he cord in a specific position. I have replaced the power cord and the problem persists, I'm assuming there is something wrong with the "AC in" socket. It could be a wobbly pin or maybe something just inside, but it's definitely affected by the position of the power cord.

I'm no engineer, but I'm decent with electronics and have a feeling I may be able to repair the AC input if I can get my hands on an official Panasonic service guide or something like that. Any tips would be greatly appreciated.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
1 Opmerking

You can download it from from here. but I can only share for a limited time;)

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

David Kreitter, looks like you will need the Panasonic part K2AH3B000020 (number 2 on the diagram) which is mounted on the K-P.C board. cost for that is around $3.00. Not a terrible complicated job and I am certain you will get it done pretty quick.

Block Image

Was dit antwoord nuttig?

Score 2

1 Opmerking:

Thank you, good sir!

door

Voeg een opmerking toe

This is Addie from BrightWay in China, professionally supplying

projector lamps.

Have you ever considered to import from China directly?

The price will be more competitive.

If you are not the right person, do you mind pass my email to this right one? my email: addie@projectorlampchina.com

Thank you so much and await your comments!

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

David Kreitter zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 1,080