Repareer je spullen Gemeenschap Winkel

The Apple ImageWriter II is a dot-matrix printer released by Apple in 1985. It accepts both line feed and regular 8.5 by 11 inch paper.

1 Vragen Bekijk alle

Opties

Apple ImageWriter II won't print from Macintosh Plus

Hello! My Apple ImageWriter, even when connected to my Macintosh Plus through the correct selected ports, will not print. After I ran the self-demonstration, it proved that there is not a mechanical failure, and it will print. Whenever I select print in a document, it says it is printing, but nothing happens. Eventually, the pop-up goes away.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

You need to open the printer selector dialog box to reset the port. It’s likely the CMOS battery needs replacing as the setting got lost.

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

I have checked all settings, and they appear to be OK. I think it might the cable I was using that I bought. It might not have had the right pinout.

door

@wmf10 - this is a different cable than before?

door

Voeg een opmerking toe

Voeg je antwoord toe

WM-F10 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 8

Altijd: 28