Ga door naar hoofdinhoud

Reparatiehandleidingen voor fototoestellen van de nu stopgezette Minolta reeks.

104 Vragen Bekijk alle

Why is my mode indicator not working? Minolta Maxxum 300si

The little triangle that indicates what mode the camera is on isn’t present, is there a way to fix this issue?

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

On the 300si these are essentially so stripped down they are fully automatic SLRs of the 90's. You cannot change it into a manual mode, but you can press the mode button and switch the predefined shooting scenes. When you have not selected one, the camera is making all of the decisions.

Enabling one of the shooting modes (partially) overrides the full auto nature of the 300si, but not completely. There's sadly no way to add a manual mode to these as they were severely cost-reduced to appeal to beginners who didn't want to buy a proper film SLR back in the day. However, Minolta is not alone; Canon and Nikon have some too. The market responded by saying we do not want these. I'd sooner deal with the aperture gear problems on the Maxxum 7 over a 300si, or even buy a Maxxum 5.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Nat727 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 10

Altijd: 46