Ga door naar hoofdinhoud

TI-84 Plus calculator support.

38 Vragen Bekijk alle

Arrow Keys don't scroll through previous calculations

The "normal" behavior of the arrow keys is to scroll up and down through previous questions and answers, but my calculator's ones act like the "home" and "end" keys. I've tried multiple factory/default resets and it still doesn't change.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Press mode and check that you're in Mathprint mode not Classic mode. An OS update to OS 2.55mp might be needed.

You can repeatedly press 2nd then enter to cycle through calculation entries.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Het nuttigste antwoord

Hi

Has the calculator had a battery leak at any point in its life?

If so that may be the cause of the issue

It could also be caused by debris inside the calculator

Here’s a disassembly guide

TI-84 Plus

If you corrosion is found I would recommend cleaning with isopropyl alcohol:-)

Hopefully this helps

Any questions please ask

Thanks:-)

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

Never had anything related to a battery leak. It just happened today morning, I was doing math work fine yesterday and it scrolled up and down just fine. The up and down arrow keys actually work, but the problem is their intended function (scrolling up and down) have been replaced by the "home" and "end" behavior.

door

@moony19142

That’s wierd

It might be worth reinstalling the software along side some other things

Here’s a link to doing that

TI-84 Plus CE Recovery Techniques.

door

Voeg een opmerking toe

Voeg je antwoord toe

moony zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 31

Afgelopen 30 dagen: 158

Altijd: 1,105