Ga door naar hoofdinhoud

A wireless, more traditional, video game controller produced by Nintendo for the Switch system. Model number: HAC-013.

88 Vragen Bekijk alle

How to remove completely stripped screw?

So I stripped the screw to the point where it’s just a round hole. I tried superglue and it didn’t work, so the hole is caked with the stuff as well. How can I remove this screw? I presume I would need a drill, but what kind of drill might work for the controller?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Hi

If it’s in a hole carefully drilling the screw head then removing what’s left with pliers is probably you best option

It it wasn’t in a hole you might be able to cut a slot into it for a flat head screw driver to go in into but this is probably not the best option for you

You could also try using a rubber band on the end of you screw driver

Hopefully this helps

Any questions please ask

Thanks:-)

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe
Het nuttigste antwoord

C K, this is only to complete the excellent answer by @hellomacos; You could try these precision screw extractors.

I’ve had good success using those, in many cases.

Precision Screw Extractor Set Afbeelding

Product

Precision Screw Extractor Set

$24.99

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

Voeg je antwoord toe

[deleted] zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 24

Afgelopen 30 dagen: 111

Altijd: 2,380