Opties

Elite Wireless Series 2 It doesn't work wirelessly

I have disassembled the controller, to try to desolder the bumpers, but I did not succeed. The problem is that when I mount it again, the controller doesn't work wirelessly, it's sync with the console, but nothing I press on control is reflected on the screen. I have connected it by usb cable to the PC and all the buttons work. I have verified that the two cables that connect the two motherboards are well connected. What error could be happening?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1

1 Opmerking:

I have this problem too. I disassembled my controller to clean the button contacts. I reassembled it and everything works except wireless communication. Maybe there's something I left unplugged? I noticed on the back side of the board the sticks are soldered to, there is a header labeled C0 that has nothing plugged into it that maybe I need to plug something into, but I just don't know what.

door

Voeg een opmerking toe