Repareer je spullen Gemeenschap Winkel

The Dyson Ball Multi Floor Upright Vacuum was released in 2012 and can be identified by the Dyson tag DC40. It is very similar in design and mechanical operation to its earlier counterpart, the DC41 Animal.

20 Vragen Bekijk alle

Opties

My Dyson works great when upright but doesn't suck well on the floor.

WHen It's upright the hose works fine, but when running (normal use) it seems to not have good vacuum. Is there a seal that's possibly broken? Where are the most common failures?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Hi @nixtechguy

Most of the time the bottom hose will have a issue if it’s not got suction when coming out of the upright position

Check the hose in the picture below

Block Image

Check that it’s seated correctly and that there aren’t any cracks in

Also try not to let it go once it was been pulled out(pulls towards you to unlatch)as they can hide away if your not careful

It you cans see any let me know by commenting on my answer and we can further look into things

Hopefully this helps

Any questions please ask

Thanks:-)

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

davew zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 11

Altijd: 77