Ga door naar hoofdinhoud

Released September 2016. Identified by Model No. SM-G610

159 Vragen Bekijk alle

Testing with another device's screen

I got a J7 prime with a completely dead, broken and miserable screen.

Took it apart (not wearing gloves, oops) and seems like the rest of the components is fine.

So I got a spare screen from a J5 prime (which has the same connector), then tried to turn it on from USB power... No success.

Is it correct to deduce that the phone is dead? Or is it simply not compatible with another model's screen?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

Hi @sharkaroid

Here's the No Power troubleshooting flowchart from the service manual that may help.

Looking at the chart, if there is no power on sound or vibration sound then there's a problem with the systemboard.

Block Image

Was dit antwoord nuttig?

Score 2

1 Opmerking:

@sharkaroid it is possible that your incorrect display is actually preventing your phone to come on. Remove the wrong LCD altogether and give it a try or even leave your old one connected. Like it was previously stated, if you do not get any vibration etc. on startup, the issue is not your display.

door

Voeg een opmerking toe

You’ll need a matching screen. Not all screens are compatible even if the connectors fit.

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

but even with an incompatible screen, would the phone turn on and vibrate if it's working?

door

@sharkaroid Even without a screen the phone would still turn on.

door

Voeg een opmerking toe

Voeg je antwoord toe

Ana Clara Forcelli zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 142