Hi i recently bought a pair of eg3 pro gaming headset used from my friend who had tested them and they seemed to work well but alsmost instantly i found the problem aka whenever i tilt my headset to the left my right earphone starts releasing static sometimes soft sometimes strong but always too annoying to be ignored what can i do to fix it at preferably no price and what could be the issue?
Is dit een goede vraag?
Rep: 25,8k
205
20
38
Hi
iv seen this before on headphones that have worn cables
if the damage is in the cable to have to cut it back then strip away some to the outer layer of the cable so that you can solder the cable back where its meant to be on the headphones
if you need anymore help please ask
hopefully this helps
Thank:-)
Was dit antwoord nuttig?
hi!
whilst the cable is suffering from the cuse of hard cables making weird knots it has been doing this since it was compleately new and the cable wasn't used basically at all before i picked it up so i doubt that is the issue maybe inside wiring?
btw i also dont have a solderer (at least not a good one since the one i have is from the 70's and solders spots as big as my monitor and is usually used for solding electrical gate pistons)
@Alastor- -Radio Demon
It might be a cold soldering joint if it’s always been like that
You could try resoldering the cables
As for a soldering iron you could find one on eBay for a verity of prices
Maybe even Amazon might have some good ones
Thanks:-)
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 27
