Rep: 21
3
4
1
I replaced the digitizer and screen on my iPhone 4, it worked fine for 24 hours. Then the screen went blank, I could tell that the LCD was working, but no video. I took the phone apart to check all connections. Everything seemed fine, I reseated all the cables. Now it works, but blinks randomly. Any thoughts?
Is dit een goede vraag?
Rep: 79
2
Hi, Sorry to be the bearer of bad news but it seems to me like there is a possible display issue (Obviously) If you can check on the board or on the display module cable you might see that one of the connector plate if not a few may be ever so slightly damaged. Check along the ribbon and look for snags or possible breaks too.
Was dit antwoord nuttig?
I checked it out and there is an ever so slight tear on the cable. Oh well, maybe Santa will deliver me a new one on New Years'.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 2,449
2 opmerkingen
sounds like a loose connection..have you tried holding power and home for 10 sceonds, apple should appear and then release buttons?
door pollytintop
@pollytintop, I tried that with no luck. Thank for the tip.
door 215Solutions