Skip to main content

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

254 Questions View all

Where do I find parts to fix VR2

I am fairly new to ds repair so I can sometimes do more damage than fix and I broke off the vr2 screw thing. (picture below)

https://imgur.com/a/e12xHDk

Block Image

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Antwoord

Most Helpful Answer

Professor Smartie that “screw thing’ is actually a Variable Resistor. Some people also call the (Trim) Pot for Trimmer Potentiometer. Your DS Lite should have two of those. VR1 is for the upper display and VR2 for the lower display with touch. Measured looks like a 50K pot. Set your pot that the resistance is around 15K between point 1 and 2. You can still make adjustments if your find scan lines on your display etc.To high and your screen may just fail or your power circuit, so be careful . BTW, you do realize that this needs to be soldered in place. Now for as to where to get it, I’d start at places like this

Was this answer helpful?

Score 1
Add a comment

Add your answer

Professor Smartie will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 9

Past 30 Days: 41

All Time: 314