Repareer je spullen Gemeenschap Winkel

Repair guides and disassembly information for Apple's 7th generation iPad. Released September 25, 2019. Model numbers: A2197, A2200, and A2198.

119 Vragen Bekijk alle

Opties

LCD flex cable connector damaged

Hello,

I was recently replacing the screen on a 7th generation iPad model A2197. However, the flex cable connecting the LCD to the board broke at the LCD end.

I purchased a new cable, however, the LCD connector was basically melted onto the copper and I had to remove it with a small wire brush which may have damaged the connector beyond repair as it's not functioning, no action on the LCD at all.

Thats what brings me here. Is it possible to solder or repair this? https://imgur.com/gallery/XZkCwzI

Thanks in advance for your response, it's much appreciated.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

hello Danth Ex

unfortunately, the tape was damaged too close to the screen. It is no longer possible to combine it. You need to buy a new screen. There's a guy in LA who takes down the dies and replaces entire assemblies of flex tapes. Try to find him in the net. I don't remember his name anymore - he made several screens with broken tapes for me.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Danth Ex zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 22

Altijd: 534