Ga door naar hoofdinhoud

Released June 2012 / Core i7 processor with Turbo Boost / Up to 1 GB GDDR5 Video RAM

596 Vragen Bekijk alle

Replacing a damaged 2.6 Ghz logic board to 2.7 Ghz one

Hi

i have a question, i got a logic board A1286 mid-2012 non-retina 2.7 GHz.

On the board, there are two extra sockets; one is the right side of the fan connector and the other one is above the keyboard’s connector.

Mine also is A1286 2.6 GHz mid-2012-non retina same as the new board, but the sockets of mine are empty, Should i be worried about the installation? since there are no extra cables to be connected to those sockets.

New one(Please enlarge the picture and see the red circle)

Block Image

Mine

Block Image

Thank you

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

No issues! Your logic board is a direct drop in. This connector is a diagnostic port and not used.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Thank you Dan.

door

Voeg een opmerking toe

Voeg je antwoord toe

Hekmat zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 41