Ga door naar hoofdinhoud

Guides and repair information for coffee and espresso makers from Jura Elektroapparate AG, a Swiss developer and distributor of home appliances.

67 Vragen Bekijk alle

My Jura A1 espresso machine’s start button is bugging

When I want to start the machine, I need to push at least 20 times the start button. Each time I click the display turns on, but the start-up process is not ignited. On the contrary when I click to shut down the machine the button reacts immediately.

I already changed the start-up button, but that did not work out. It seems to be an electrical problem on the circuit board. Anyone encountered the same problem? Can I replace the mother board of the machine? Where could I buy this?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Well, yes, but it is expansive: (150€)

I wouldn't it without knowing if it really is the cause.

Was dit antwoord nuttig?

Score 1


Thank you for the website! I will wait for other people experiencing the same issue.

But 150€ will always be cheaper than sending the machine to a repair shop.


Voeg een opmerking toe

Voeg je antwoord toe

Sven Nijs zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 8

Altijd: 32