Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Model A1297 Unibody: Early 2009, Mid 2009, Mid 2010, Early 2011 & Late 2011

622 Vragen Bekijk alle

Mac is running but no display

A friend asked me to check their MacBook Pro 17” Late 2011, because it totally stopped powering on (no power indicator and fans are not working). I was able to turn it on, by using another adapter / charger and replaced the RAM sticks, but there is no display. I can only hear the chime and the fans spinning/ I also see the display’s backlight turn on then off again, so I tried to shine a bright flashlight to see if its just the backlight that’s broken, but I can’t see anything. I also tried to reseat the display cable.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Not good ;-{

Sounds like your logic board has a bad capacitor in the graphics logic. You’ll need to find someone with the deeper micro soldering skills to fix this.

Was dit antwoord nuttig?

Score 1


Can I plug a display cable instead of using the built-in display, and treat it like a desktop or do I need to have the capacitor fixed?


@mylesuy - I doubt the external display will work, but its worth a try! You'll need to get the DVI to HDMI, VGA or DisplayPort adapter to test it out.


Voeg een opmerking toe

Voeg je antwoord toe

Myles Earvin Uy zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 18