Ga door naar hoofdinhoud

Model A1318 / 32 or 64 GB capacity

299 Vragen Bekijk alle

need to know how to make the touch screen work again

Hi I bought ipod on ebay and it connects to itunes but the touch doesnt work. It had been water damaged. I got a new digitizer and nothing. got the 91% isopropyl alcohol and cleaned it all and still nothing.

After I put it back together it still syncs,so thats good

Lcd does turn on

Could it be the digititer or the logic board??

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

you might be unlucky and have a bad digitiser...check the returns policy, check you've ordered the right generation digitiser etc. Try again.

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

The part where the digitizer connects to could be bad. You would need to replace the motherboard flex cable. It's very difficult. You need the part and conductive tape... Heat gun and solder iron. I'd recommend staying away from iPods that work with the exception of touch response - many people think they repair as easy as iPhones, but in my opinion are much harder and less likely to survive liquid damage.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Double check the ribbon cable and the connection points.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

ok i'll see if they can change it.

door

Voeg een opmerking toe

On the underside of the main board, there is a large, shiny heat shield protecting important components. Use a metal spudger to remove that piece, and scrub well underneath it. I have encountered water damage issues involving the components under that in the past. Its worth a try!

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

cool ill try it

door

where the speaker is right?

door

Voeg een opmerking toe

Voeg je antwoord toe

david ortega zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,804