Ga door naar hoofdinhoud

A1708/EMC 3164 — Released June 2017, this entry-level MacBook Pro retains its traditional function keys (as opposed to the OLED Touch Bar).

563 Vragen Bekijk alle

Screen wont turn on after a screw got pinched in display

Screen wont turn on after a screw got pinched in display, but the device still turns on like u can hear it but it wont turn on screen wise, this was after a replacement screen, so i tested the original screen again to make sure i didnt fry anything and the original screen still works, can really a little dent prevent the screen from turning on. heres a picture of the damage

Block Image

Update (12/05/2020)

its a 2017 macbook pro 13inch'

@oldturkey03

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
3 opmerkingen

anyone have any ideas

door

@zmentz your MBP a A1708/EMC 3164 or a A1706 / EMC 3071? We need to know this so we can identify to right components for you. Do you have your logic board out? If so post some good top and bottom pictures of it with your QUESTION. Voeg afbeeldingen toe aan een bestaande vraag

door

@oldturkey03 ok will do, one question also is the backlight fuse on the bottom or top and its also the a1708, and i will send the pictures tomorrow because im currently not in work today

door

Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

@zmentz it all depends on where it got damaged and what parts got shorted out. Size of the damage does not matter, location most certainly does. Since your old screen works etc. it is definitely your display that got shorted out.

Update (12/09/2020)

@zmentz it’s on the top site. The fuse is a 3Amp 32Volt fuse in a 0603 package.

Block Image

Was dit antwoord nuttig?

Score 1

4 opmerkingen:

now all the sudden the original one wont work now, i dunno what happened

door

@zmentz now it gets interesting. What happens now? Your MBP comes on? Checked the backlight? What exact model/year etc.is your MBP

door

2017 13" macbook pro

door

@oldturkey03 so i want to check the backlight fuse becasue i was mistaken and it is not working because if i shine a light into the back of the screen i get a display so is the fuse on the top or bottom of the board?

door

Voeg een opmerking toe

Voeg je antwoord toe

Zach Mentz zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 78