Repareer je spullen Gemeenschap Winkel

The Sony Playstation 2 SCPH-790xx is the fourth revision of the Playstation2 slimline model.

11 Vragen Bekijk alle

Opties

New PS2 Slim laser won't travel on rail.

I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.

I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.

Update (11/12/2020)

Block Image

Here’s an image of the bottom of the defective unit for reference. The new working laser I received didn’t have these.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

I looked more closely at the issue and found that on the return sensor for the new laser I received there were two metal tabs extending from the bottom. They weren’t very long but long enough to hit the ribbon when traveling out or back to center. I took and filed them down, but had other issues with the laser so I had the seller send another. Sure enough the new unit arrived the next day and didn’t have these two metal contacts. It’s like the new laser was from a completely different batch and just works great (without stopping halfway along the rail).

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Nick Jones zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 19

Altijd: 1,140