Repareer je spullen Gemeenschap Winkel

Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

591 Vragen Bekijk alle

Opties

Screen spazzed out and now it's darkish

Apple logo is still lit on the back and screen looks like a greyish color that wants to let the light shine. It works without any issue with an external monitor. How can I fix my laptop screen?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

3 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

First reseat your display cable. See step #14 of the display replacement guide:

MacBook Pro 13" Unibody eind 2011 Vervanging van het scherm

Was dit antwoord nuttig?

Ja Nee
Score 1

3 opmerkingen:

Mayer! I think that solved the problem! Only time will really tell but it seems to be functioning just fine currently. Thanks so much for your help!!

door

Mayer! I think that solved the problem! Only time will really tell but it seems to be functioning just fine currently. Thanks so much for your help!!

Am I able to clean that connection? Like I said it seems to be functioning fine but when it was starting it seemed to show static but stopped. IDK?

door

You can use vinegar on a Q-tip to clean contacts.

door

Voeg een opmerking toe

Opties

Hi there Logan!

So, it sounds like the LCD might be cracked or damaged internally, which means, sadly, you might have to replace the screen.

However, did you try to reset the SMC or PRAM at all? For the PRAM, all you will have to do is:

  • Turn off the computer and hold down the Option, Command, P, and R keys.
  • Then turn it back on again.
  • Keep holding the four keys for at least 20 seconds and wait to hear the chime and when the Apple logo appears for a second time.

For the SMC, shut down the computer and hold down the Power button for 10 seconds and let go. Next, turn it back on.

Let’s hope that it’s just a quick reset issue.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

I tried both of the suggestions and no picture. I hear it turn on, apple logo is still lit but the screen is a greyish color with no picture. Is replacing the screen difficult?

door

Voeg een opmerking toe

Opties

Hey there Logan. I would recommend doing what Mayer said above and reseat the display cable. if that doesn’t work you could replace the Display. It isn’t too terribly difficult of a job if you know your way around electronics and repairing them. Just watch a couple of videos and you should be perfectly fine!

Was dit antwoord nuttig?

Ja Nee
Score 0

3 opmerkingen:

I did what Mayer said and it seemed to work. I'll update if things change. I asked a question about cleaning that connection, is that possible?

door

it is, I would recommend 99% isopropyl alcohol (rubbing alcohol) and an old toothbrush lightly. canned air is always a good option to make sure it is dry before plugging the display cable back in. also make sure the battery is unplugged the entire time as well.

door

Thanks for the additional tip! It's been working great so far so I won't mess with it unless it starts to act up. Thanks again for all your help!

door

Voeg een opmerking toe

Voeg je antwoord toe

Logan zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 76