I replaced the Digitizer on an iPhone 11 Pro Max and it seemed to work fine during testing. The customer called a couple hours later saying the phone is freezing. It works fine after a hard reset but only for about an hour then freezes up again. Any suggestions? Could it be the aftermarket LCD I installed?
Is dit een goede vraag?
Rep: 221,4k
15
289
807
It could be a bad screen or perhaps something went wrong during the repair. Obviously, you should take a closer look to see if any of the flexes are damaged or if any components were damaged or dislodged near the relevant connectors.
As a repair shop, you probably have other screens so I would try one of those first. If you still have the customers original screen and it is functional, try that one too.
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 5
Afgelopen 30 dagen: 43
Altijd: 1,406
