Ga door naar hoofdinhoud

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

467 Vragen Bekijk alle

What is this part and where do I connect it?

27ā€ iMac late 2009

Block Image

Block Image

Block Image

This came out stuck to bottom edge of motherboard. I did not see cable connection point.

Now that video card and can has sent replaced I need to put system back together.

Until I know where the imaged part goes Iā€™m not able to complete my repairs.

Answers are greatly appreciated.

Thank you in advanced.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
2 opmerkingen

I don't think you identified the correct system. Your images are thumbnails not large enough to read the label

Lets do this locate the serial number on the bottom of your systems foot and plug it into here EveryMac - Lookup tell us what it returned.

door

W800824k5pm

Showing 1 - 1 of 1

iMac 27-Inch "Core 2 Duo" 3.06 (Late 2009) 3.06 GHz Core 2 Duo (E7600)

Intro. October 20, 2009 Disc. July 27, 2010

Order MB952LL/A Model A1312 (EMC 2309)

Family Late 2009 ID iMac10,1

RAM 4 GB VRAM 256 MB

Storage 1 TB HDD Optical 8X DL "SuperDrive"

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

OK here you go! This is the MCM heat sink

Block Image

The thermal sensors cable connection is just to the bottom left

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Thank you vary much. Now I can put iMac back together.

door

Voeg een opmerking toe

Voeg je antwoord toe

Cynthia Luttrell zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 72