Repareer je spullen Gemeenschap Winkel

Google's third-generation Pixel-branded smartphone, and their first "notched" phone. Comes with a 6.3" QHD+ OLED display and 64 or 128 GB of storage. Available in Nearly White, Just Black, or Not Pink.

77 Vragen Bekijk alle

Opties

micro solder part for finger print reader Pixel3XL

I am having trouble sourcing the connector that is soldered onto the motherboard for the finger print reader. The one that has the black flap to lock the ribbon cable in place. if anyone could assist where i could find this part it would help greatly. thank you

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 2
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

If you cannot source one from another board I would suggest searching Digikey and Mouser. They should have something that’s compatible.

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

Can anyone describe the process of sourcing the fingerprint connector from the Pixel 3Xl. I would prefer to source it from one of my broken 3xl's than to find and pay some minimum rate for it to be micro soldiered. Is the connector on a board that I can removed my from for parts phone and replaced on my repairable phone?

door

Voeg een opmerking toe

Opties

I think I found it here….

https://www.digikey.com/en/products/deta...

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

phillip lvov zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 199