Repareer je spullen Gemeenschap Winkel

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Vragen Bekijk alle

Opties

Burnt out coil on motherboard and the device isn’t powering up

Burnt out coil on motherboard and the device isn’t powering up

hi there guys just recently started researching about microsoldering. I have this iPhone 5s which after inspecting seems to have 2 burnt out coils just near the charging chip. I will uploads pics to show.

the iPhone isn’t powering up. Will getting the coils fixed repair the phone. Or does any one have any help as to where I should start. Thanks

Block Image

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

I would definitely start there. When you remove the coils it would be easier to check for shorts. You should be able buy a broken phone for donor parts. If you are going to do this yourself I would recommend practicing on some junk boards or have a professional do the work.

Was dit antwoord nuttig?

Ja Nee
Score 0

6 opmerkingen:

This is a junk board I have lying around. Do you think the coils could be the reason for not powering on?

Also how would you remove the coils. Do you have a YouTube video or instructions this is going to me first attempt at something like this. Thanks

door

Watch videos from jessa at iPad rehab, jason at sts telecom, and Louis rossmann on YouTube. You will need a hot air machine and a soldering iron. You can buy a cheap one on Amazon but the quality is soso. If you want to learn how to do this and are interested in maybe doing it for a living or side income I would recommend getting some decent equipment. Like a amscope 7x45 microscope with a camera mount. Hakko fx951 soldering station and fx2032 micro pencil and some hot tweezers. You can purchase all of the equipment on Amazon.

door

Okay great I’ll take a look now

door

According to schematics it is l2_rf and l3_rf

Which seem to be the burnt out ones anyone know where to purchase these 2 from?

door

I am not sure. Are you in the us?

door

1 commentaar meer tonen

Voeg een opmerking toe

Voeg je antwoord toe

Rakesh zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 143