Ga door naar hoofdinhoud

De zesde generatie iPad, gelanceerd in maart 2018. Verkrijgbaar als Wi-Fi en LTE-model met 32 en 128 GB aan opslag. Bevat een 9.7" Retina-scherm en 64-bit A10 fusion-chip.

221 Vragen Bekijk alle

Why did the touch/digitizer function randomly stop working?

Customer brought in an iPad 6 (A1893)

The digitizer no longer functions at any capacity.

It is a company iPad, so it is in pristine condition.

Factory resetting device hasn’t worked.

I removed the screen- unsurprisingly, an OEM lens.

No signs of liquid exposure internally- again, pristine.

No visible connector obstructions.

I have tried TWO replacement digitizers to no success.

Board issue?

maybe its the touch disease curse of Apple 6th generation products?? /s

Any further insight would be greatly appreciated.

Thanks

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Hi Steve B,

Hold down the circular Home button and the On/Off (Sleep/Wake) button at the same time for around 10 seconds. This will restart the device and should restore the screen to full working order.

Hope this helps,

Sincerely, Onlaf

Was dit antwoord nuttig?

Score 0

1 Opmerking:

thanks for the response Onlaf. attempting the soft reset, you speak of, was something we’ve tried from the beginning. we just received our third screen assembly(from varying vendors, at that) still no success in regards to the digitizer function yet the LCD has functioned fine with each replacement we’ve tried. the flex connectors visibly appear fine. even the solder connection on the board side looks fine. i’m assuming an underlying board issue but just throwing it out to the community to ensure there isn’t another approach i could take in resolving this .

thanks again,

Steve

door

Voeg een opmerking toe

Voeg je antwoord toe

Steve B zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 11

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 11

Altijd: 56