Ga door naar hoofdinhoud

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1622 Vragen Bekijk alle

How can I restore the firmware? Firmware update keeps crashing.

I recently replaced the hard drive cable on a MacBook Pro (13-inch, Mid 2012). The machine has an SSD installed running 10.9.5. After replacing the hard drive cable I attempted to boot up the system. It gave me a gray screen with the Apple logo, then the thick firmware update progress bar below the Apple logo. It gets about half way through the firmware update progress bar and then the machine powers off. Note that there are no startup tones or beeps happening during this process.

It seems like the problem is firmware corruption - my question is, how can I restore the firmware on this model? I’ve looked through Apple’s list of firmware restoration CDs and I can’t seem to find one for this machine. Any advice? Thanks!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Boot into the the Recovery Mode by holding down the Command & R key on startup and choose re-install macOS.

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

Voeg je antwoord toe

Zach zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 769