Ga door naar hoofdinhoud

Taping reball stencil or not

I wanted to get some opinions on taping an integrated circuit to a stencil or not. Are most people using tape and if so what kind is best. I have seen some videos were it seemed they just laid the stencil on the the integrated circuit without taping

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

It’s entirely up to you and also depends on the size of the IC. If you feel that taping an IC to a stencil is what makes you feel comfortable and holds the IC in place, that’s definitely ok. I personally use Kapton tape (heat resistant tape) . I have done both ways a few times and after you get a hang of it, you just kind of become used to it. It is ideal to tape really small chips that have a decent sized ball grid array to the stencil.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

mikespring1972 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 41