Ga door naar hoofdinhoud

2.26 or 2.4 GHz / White plastic unibody enclosure

645 Vragen Bekijk alle

MacBook dead after SSD upgrade

Hey all, I have tried to upgrade my MacBook with an SSD. I have opened the back plate, disconnected the battery cable, removed the HDD and inserted SSD. After that, the MacBook was dead. There is nothing, no fan spin, no beeps, no lights, nothing. I have tried with the old HDD and it’s the same. Dead. The only light I get is from magsafe.

I have tried booting it up with no battery, with battery and magsafe, with HDD, SSD I have disconnected the keyboard, RAM, … don’t know what else I can try.

Anyone have any idea where the problem could be?

Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

And of course, right after I posted the question my MacBook turned on.

It looks like that the solution was to disconnect and re connect the drive cable connector? I’m confused. Anyway, it works now - I’m just installing OS on the SSD.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

Nice it probably wasn't connected right or the pins were dirty then.

door

But shouldn't MacBook boot up normally even with this problem?

door

Voeg een opmerking toe

Try checking the power button or any small broken microchips.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Miha Veber zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 75