Ga door naar hoofdinhoud

Uitgekomen op 4 november 2017. Model A1865, A1901. Verkrijgbaar als GSM of CDMA / 64 of 256 GB / Zilver of Space Gray. (Uitgesproken als "iPhone 10".)

1196 Vragen Bekijk alle

No cameras or face ID after screen replacement on iPhone X

Hi All,

I replaced the screen on the iPhone X and now the cameras (front and rear) and face ID don’t work. The camera app is black when I open it. It shows the white button and last photo taken.

I don’t see any damage to the flex cable or connector on the board.

I’ve tried multiple other cables with the same result.

I reset the settings and updated it through iTunes.

I put the original flex back on the original screen and same result. I am not sure if face ID or the cameras were working before the repair. I normally check what is working and what isn’t, but I forgot to this time.

Do I need the device that copies the information from the old screen? Is that something that is just required now? If so, is there a solid option/place for that?

Any suggestions are greatly appreciated!

Thanks

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Last I recall FaceID didn’t get disabled when you replaced the screen on the X. Make sure you put the correct screws in their correct location. I’ve seen a video posted on STS Telecom’s channel on youtube with an issue like this where a screw was put in the wrong place and completely ruined FaceID and camera functionality. https://www.youtube.com/watch?v=0RvXF_Vf...

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

It turns out it was an issue with the power chip on the board and needs to be replaced which requires micro soldering.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Mitch zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 98