Ga door naar hoofdinhoud

Handleidingen voor fornuizen en ovens op gas of elektriciteit.

177 Vragen Bekijk alle

20 PIN Ribbon Connector

I have a Jennair Range JES9860AAS. I am replacing the Electronic Control and have a ribbon cable to disconnect/connect. Can anyone tell me the type/name of connector and how it connects/disconnects? I have attached a picture of the new card and connector. The connector on the old card broke when trying to disconnect. 15 years of thermal cycling made the connector brittle and gave no tolerance for my clumsiness.

Block Image

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

I believe this is called a "Pin Head" Connector. To remove the connector you'll want to grab the head of the connector closest to the actual board and gently wiggle it back and forth from each end until it detaches. Do not pull from the wires themselves as this can cause damage to the connector and/or the board.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Kyle Levin zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 52