Ga door naar hoofdinhoud

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1361 Vragen Bekijk alle

Camera focus after case replacement

I recently replaced the assembly of an iPhone 7+. However I’m noticing that the camera images are blurry regardless of zoom setting.

When I take the phone apart, and remove the camera from the “port” it sits into, the camera is no longer blurry (I tested while the phone was apart and camera lens moves in and out and focus is perfect). As soon as I put the camera back into it’s spot, the camera is blurry. The lens is perfectly clean.

I have a feeling that when the camera is placed in the port, the actual camera lens can’t “zoom” and physically move.

What am I doing wrong?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

Same problem here, after replacing the glass at the back of the rear camera with the middle part also, couldnt fix de alignament bracket properly , and the conclusion is no focus on the camera, also the selfie camera no longer works. So, i sugest a new case, original, is the only way to fix these problem, this what i will do.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Hi, were you able to fix this problem? i have a similar issue with my 7plus

door

Voeg een opmerking toe

Voeg je antwoord toe

SynPDX zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 237