Ga door naar hoofdinhoud

iPhone 7 water damage not turn on

Hello. I have a problem with the flooded iPhone 7, it had a short circuit of 0.350a I was able to remove it now it is 0.000a after turning on nothing happens and stands at 0.060-0.080a. Have any ideas?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

you need to clean it using isopropyl alcohol. that will involve completely disassembling it.

Electronics Water Damage

iPhone 7 Vervanging van de achterste behuizing (you do not have to replace the rear case, but this guide will go over complete disassembly.

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

pcb I already cleaned in an ultrasonic cleaner. A few capacitors fell in and there is no pmbb layout because it was short

door

@dxwxd ah, apologies. This is probably beyond my scope. @refectio could probably help here.

door

Voeg een opmerking toe

halo cześć,

0,06A przy starcie wskazuje na niski bilans energetyczny. W takich przypadkach warto przestudiować linie główne zasilania. W większości przypadków, jeśli ich parametry mieszczą się w normie szukałbym “korka” za PMU. Sprawdź porty LDO z MPU i CPU razem z liniami SOC. Niewiele dalej, bo od 0.09 zaczynają się spięcia pod procesorem, spowodowane przegrzaniem 7-ki przy zdejmowaniu shield’ów.

pozdrawiam,

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Dawid Wojtyła zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 98