Ga door naar hoofdinhoud

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

467 Vragen Bekijk alle

Is this possible to do? Please answer

So i have a late 2009 imac 27’ and while opening it i accidentally broke the LVDS internal screen connector off the logic board and i broke it completely so i had to run it off an external monitor, and so i bought a new logic board and the same thing happened where i broke the internal screen connector. So i give up and so i was wondering if it is possible to connect the internal screen to the mini displayport port on the imac instead of the internal screen connector?? is there an adaptor or cable to do tbis?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Sorry you can’t route the signal out and then back in via the external miniDisplayPort.

The best thing here is to find someone with good soldering skills who can fix one or both logic boards. The connector is available.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

no this is not possible to do because Apple uses a proprietary connector

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Teddy zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 54