Ga door naar hoofdinhoud

Cannot boot past Apple logo, after screen replacement kit.

I followed the guide and replaced my iPhone 7 screen with the iFixit kit, - nice kit, btw - and now, the phone will not boot past the Apple logo.

The phone worked fine, previous to the screen replacement, but now only boots past the Apple logo, if the front-facing camera cable is disconnected. Is it the proximity/ambient light sensor? Is it the camera?

Just FYI - I did put it in DFU and update it with the current, official Apple IOS image, via iTunes.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

First make absolutely certain that flex cable is seated properly. Use the ifixit spudger that came with your tool kit to firmly press it down.

 If it is still looping you may have a small tear in the flex cable from the transfer.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

corbinbox zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 41