Ga door naar hoofdinhoud

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Vragen Bekijk alle

Home button works but not digitizer

Just replaced my digitizer for iPad mini 1 but only the home button seems to work. The touch doesn’t seem to respond. It was originally for iPad mini 2 (new bought). I haven’t taken off the tapes to close the iPad yet. Any ideas?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
2 opmerkingen

Were they advertised as being compatible? If not that may be your answer.

door

Says it is compatible according to the listing

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Hello. Try reconnecting the flex cables and see if it works. Otherwise check the cables for damage and sharp bends etc. If you can’t get it to work then get a refund and buy a different digitiser.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Tried all will try to get another one

door

Voeg een opmerking toe

Voeg je antwoord toe

Johnny trinh zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 49