Opties

Should the fans run all the time on a 820 00239

I got sent a mac which had the U5860 temp sensor torn off along with all the pads on the board. It would take ages to boot if at all and the fans where spinning flat out. I turtled the chip, ran 9 jumpers, masked the chip and jumpers and installed the board back into its housing. I have tried all the resets.

· The mac boots straight up but the fans do not spin

· When I run the diagnostic check it will spin each fan separately

· The diagnostic results show no problems detected.

We live in a cold climate I have tried playing YouTube videos to get the fans to spin but they don’t. The CPU doesn’t feel extremely hot. Am I missing something or is it normal on these newer macs?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 1

Voeg een opmerking toe

Gepost: 31 aug. 2019

Opties

Unless you are located on Antarctica right now, your not is a cold enough climate to worry about SMC and the thermal sensors ;-}

What does TG Pro tell you? Post a snapshot of the main window (you'll need to resize it to get everything in) Voeg afbeeldingen toe aan een bestaande vraag

Was dit antwoord nuttig?

Ja Nee

Score 1

2 opmerkingen:

Thanks Dan. TG-PRO displayed a message saying. “This model of mac will safely turn the fans off when the CPU is running at low capacity.” That’s all I wanted to know.

31 aug. 2019 door Chris Stables

@imicrosoldering - Thats good! Sounds like you good to go! Don't forget to accept the answer.

31 aug. 2019 door Dan

Voeg een opmerking toe

MacBook Pro 13" Touch Bar 2017

Should the fans run all the time on a 820 00239

1 Antwoord

Voeg je antwoord toe