Rep: 225
4
5
1
hello the team
I have a problem with my iphone 7 the component U2 was broken
I change it
but now the phone is rebooting but the battery percentage is misleading (it goes from 1 to 100%)
I put it down and then turn it back up to 56%
when I test with the multimeter the value is of 3.7V
i have replaced the battery but the problem is still
Is dit een goede vraag?
Rep: 2,4k
4
1
1
Brother that is SWI (Electric quantity detection) pin fault.There in iPhone so many small ic resistor works for that.Sometime while open screw also that parts makes damage.
In my suggestion.
Check the battery connector SWI pin in a good condition.
This flactution on battery percentage not issues to Trister but might be in Tigris and that is also a charging ic too.
Check gnd resistance on Bsi might be open or damage from swi to tigris.
Was dit antwoord nuttig?
Follow that line mark on red
I want to thank with all my heart my brother Akash
you were right my dear brother it was the connector swi the cause of the problem
with the help a little tools I straightened it
thank you again my brother Akash
thanks a lot
My pleasure brother.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 274
