Ga door naar hoofdinhoud

HP desktop PC. Shipped with a Socket 478 Celeron or Pentium 4. This motherboard will not take anything faster then a 533MHz FSB without throttling upgraded processors. This machine requires a new motherboard for a 800MHz FSB or higher processor.

2 Vragen Bekijk alle

Reset to factory settings, can't connect to the internet

I reset my HP presario desktop computer to factory settings, now i can't seem to connect to the internet. Before reset, it was connected to the internet. What could be the problem ?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

A few things might be wrong:

  1. The full factory reset could have deleted your home’s WiFi password from your computer’s hard drive. This will cause the computer to be unable to automatically connect to your home’s WIFI. You may have to re-enter the password.
  2. Your system may have been left in “airplane mode” after the reset. This will block all wireless connections to your computer. If there is a small airplane icon on the right of your Taskbar, please click on it and de-select the Airplane Mode option on the pop-up menu.
  3. The driver for your Network Interface Card may have been reset to an earlier version. This will render the card unable to work properly. Please connect your computer to your router via an ethernet cable and update your NIC card.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

gemmac14@yahoo.com zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 6

Altijd: 1,229