I have an Ez-go PDS. My forward/reverse switch is a dash mount. When I select reverse, my beeper comes on but the cart starts to engage in reverse but doesn’t move. Forward works fine. Any suggestions?
Is dit een goede vraag?
Rep: 601
3
If yours is like mine, under the seat is a large (~12” x ~8”) plastic cover, held on by 4 bolts. Upper 2 are easy, lower 2 aren’t. Inside are the power and reversing relays. There’s probably is a fuse inline with the reversing relay coil. The cart I work on has a big, manual switch not a relay. I’d look for fuses and listen for the relay engaging before pulling any covers etc.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 1
Afgelopen 30 dagen: 8
Altijd: 1,023
