Repareer je spullen Gemeenschap Winkel

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Vragen Bekijk alle

Opties

Black screen after startup with the chime sound

Urgent help needed!!

I bought new logic board, for my 27” iMac late 2012,

I followed the IFIXIT video instruction exactly as showed, and I replaced my board with the new one and afterwards I turned on my iMac and heard the chime, but it has a black screen!

I don't really know what's wrong, can anyone give me a clear reason for this problem.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
4 opmerkingen

What video did you follow? I don't know of an iFixit video replacing the logic board for this system.

Also why did you think you needed to replace the logic board? The more detail here might give us an idea what the issue is.

door

Oh might not be ifixit video, the reason I change the logic board was the display was showing line and I can hardly see a thing and the mouse won't move the way it use to, I have a video. https://www.dropbox.com/s/ipctuawd51u1y7...

door

Where are you located?

I think your real issue is a bad power supply given the vid. Do you have your system plugged into a surge suppressor or better yet a UPS.

door

I am here in Nigeria, even as that the screen should have boot up just the way it was before.

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Here’s a god video on replacing the display How to Re-Apply Your 27” iMac Display. Often times the display connector gets put in backwards!

For reference here’s the iFixit guide on how to replace the logic board iMac Intel 27" EMC 2546 Vervanging van het moederbord You might want to review it to see if something stands out differently than what you did.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

What does the internal diagnostic LED's telling you?

door

Voeg een opmerking toe

Opties

Hello I been servicing HDTV and monitors for over 25yrs, if you replaced the logic board and still get the same issue or no screen, then this may be a panel issue. The panel matrix is faulty and need to replace. Replaced the screen. Also have the power supply checked for Leaky capacitors or ones that are swollen on its tops.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

Thanks for your response, I wasn't getting thesame issues I only can't see anything on my screen this time, my guess would be LCD , but before u conclude it LCD I will have to try and connect to external monitor.

door

Voeg een opmerking toe

Voeg je antwoord toe

SKYMENZ films zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 146