Repareer je spullen Gemeenschap Winkel

The March 2015 update of Apple's 13" MacBook Pro Retina Display, model A1502, features fifth-generation Intel Core i5 and i7 processors and introduces the Force Touch trackpad.

1185 Vragen Bekijk alle

Opties

Replacing trackpad cable, any need to disconnect battery/logic board?

Based on answers here, I need to replace my trackpad cable. In the trackpad replacement iFixit guide, first steps are to remove battery cable and logic board cable. Since trackpad cable should run over the battery, and that is all I am replacing, do I need to remove the logic board and battery cables for any safety reasons, or can I just remove logic board cable cover and remove the trackpad cable? Thank you for your help.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Always disconnect the battery when working on electronics. If you drop something metal on the board then it's shorted somewhere, if a connector doesn't go in right it's shorted, if you tap something anywhere that's an exposed contact you risk shorting it. No matter how small you should always disconnect the battery and unplug the device you are working on to reduce the risk of damage.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

philyfan zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 144