Repareer je spullen Gemeenschap Winkel

Guides for the Wi-Fi version of the iPad Mini 4—model A1538. Announced on September 9, 2015, the iPad Mini 4 is the successor to the iPad Mini 3.

97 Vragen Bekijk alle

Opties

Can you ID this blown component?

iPad Mini 4, A1538. The device suffered a broken LCD, but intact glass panel. I disassembled, transferred the necessary components to the new panel, and tested. Home button/touch IC was recognized, digitizer worked great, as did the LCD. Shut it down, disconnected battery & panel ribbons. I applied my adhesive, reattached the ribbons and battery, screwed the plate down and turned it on. Device turned on normally, I begin seating the display into the frame and the panel goes black. Battery was previously well charged.

I disassemble, remove my fresh adhesive, and discover this mess beside the battery connection.

I’m not sure how or why this/these components failed, or what they are.

Any assistance would be greatly appreciated.

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

That looks like a capacitor, I can't say for certain since there's no schematic diagram available for mini 4.

Update 3/13/19 -

As Minho has pointed out, that is not a capacitor, it's a ferrite bead (filter).

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

It is not a capacitor, it is a ferrite bead (filter). I just looked at a donor mini 4 I have on hand to confirm. Besides, it is blown wide open which in and of itself is indicative of a ferrite bead.

However, I don’t know what the rating is but it is an 0402 package size so I would go with something similar to this component on the PPVCC_MAIN_LCD_SW_CONN line of the mini 2. Check out L2201 a 0402 Ferrite Bead at 120R/1.5A.

Block Image

Was dit antwoord nuttig?

Ja Nee
Score 3
Voeg een opmerking toe

Opties

I agree with Sammy, that is a capacitor. Resistors are typically black (or blue on some iPhones) and capacitors are brown. Problem is, you would need to know a) the specifications of the capacitor and b) why it blew in the first place. I do not know about iPads, but I imagine just like other Apple products there will be a part number somewhere on the board. That is the number you would use to search for schematics.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Marshall Grimes zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 203