Unit will not fully boot.
I’ve tested multiple hardrives with known working partitions.
i’ve swapped out the hardrive cable with a new functional cable.
tested the hardrive on separate macs, and they work fine.
I’ve performed a Pram reset and reset the SMC to no avail.
It passed multiple extended hardware tests.
It has no peripherals connected and isolated further by removing the non essential components, Airport/diskbay.
And i legitamitly have ran out of ideas.
any thoughts are welcome…
Is dit een goede vraag?
does it work with a USB to SATA adapter?
door mayer
It will not boot to externals or recovery mode.
door Jared Owens