Repareer je spullen Gemeenschap Winkel

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Vragen Bekijk alle
Vraag afgerond

Opties

Touch screen only work after restoring

Hi,

I have an iphone 3G.

Well the touch screen doesn't work anymore.

I replaced it and it still doesn't work.

Now what i did, was that I put the logic board in another iphone and restored it. and then it worked!

But when I changed the logic board back in my iphone, it isn't working anymore.

I did this 2 times, its really strange,

My first toughts were that connector 2 is broken, but now i'm not shure anymore.

Now i'm thinking that it is a software related problem?

I restored back to original iphone firmware (4.2.1).

Can someone please help me?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0

1 Opmerking:

Have you taken your screen (from the non-working phone) and placed it on the one that worked? It may be your "new screen" make sure that you have a 3g and not a 3GS screen

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

I already did that and both screen work.

Now yesterday i gave it another try, and i took my phone, pressed in the right upper corner on the screen were the connecter is underneath, and then it worked. but only verry short, after that it didn't work anymore.

then it should be the connector right??

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

the strabged thing is just, that u put the logic board in the other phone, tested it, it didn't worked, restored it, and then it did work.

then replaced the logic board back, and then it didn't work.

Strange phone i have :p

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 975