Repareer je spullen Gemeenschap Winkel

Released June 2012 / Core i7 processor with Turbo Boost / Up to 1 GB GDDR5 Video RAM

596 Vragen Bekijk alle

Opties

How do I know if the ssd and new RAM is working?

When I check About This MAC I still see the old information. Is there a place where I can see the new levels of RAM and the SSD I installed? Also the computer won’t boot unless I have the external drive attached - which has the copy of my old hard drive . What do I need to do to get the computer to boot up internally?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The information within the About this Mac should be correct. I’ve never seen if not reflecting whats installed.

You can also look at your System Report Memory & SATA/SATA Express sections after clicking on the button in the About this Mac panel. What do you see there?

As far as why your new SSD is not booting up did you format and install the MacOS on it? Did you alter the startup drive setting in the preferences?

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe
Het nuttigste antwoord

Opties

You may need to reset the NVRAM

Resetting NVRAM

  1. Shut down your Mac.
  2. Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
  5. Hold these keys until the computer restarts and you hear the startup sound for a second time.

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Kristina Graham zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 60