Ga door naar hoofdinhoud

Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

794 Vragen Bekijk alle

Replaced trackpad only works when touching laptop body?!?

I recently replaced the trackpad (and mounting brackets) on my MBP, as it had been damaged by a swollen battery.

I thought the new trackpad was faulty, but it turns out that it works fine, as long as I am touching the laptop body! I assume this is an issue with electrostatic charge or similar, so that by touching the rest of the laptop I am somehow completing a circuit?

When I'm not touching the laptop (so that the only contact is with the trackpad) the cursor behaves erratically, but as soon as I touch the aluminium body it works perfectly. Do I need to somehow ground or earth the component?

Any advice greatly appreciated, please!!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

Is the flex cable Ok? Are completely you sure you attached the flex cable correctly after mounting the new trackpad?

Was dit antwoord nuttig?

Score 0

3 opmerkingen:

The flex cable was fine, so I reused it. It seemed to be attached correctly - I followed the video tutorial as closely as I could. If it works perfectly when I touch the laptop case, I wouldn't have thought that could be the cause…?

door

OK, so - slight update. Having gone back inside the casing and checked the flex cable, that is fine too. However...when the power supply is removed (i.e. the laptop is working off the battery), the trackpad works fine!!! So it only really jumps around and starts to become unresponsive when it is plugged in to the power and I am not touching the laptop casing elsewhere. I now feel it's something to do with grounding and the power supply...

door

Hey any news about this? I'm getting the same exact problem!

door

Voeg een opmerking toe

Voeg je antwoord toe

Philip O'Donnell zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 120