Rep: 1
1
I have a 1999 Toyota Rav4 2.0L and I've replaced coils, plugs, timing belt, crank sensor and cam sensor, did continuity test from crank sensor and cam sensor to the computer and the wiring checks out ok, but its still throws a p0340 code for cam sensor, any ideas would be greatly appreciated
Is dit een goede vraag?
Rep: 25
1
Engine vacuum leak will cause it to run rough and can throw ecm / cam sensor code
Was dit antwoord nuttig?
Rep: 1
1
checked wires? follow the harness back, look for breaks or rubbing.
Was dit antwoord nuttig?
Maybe bad one out the box?
I took it back off, did ohm reading and passed a piece of metal in front of it and its putting out correct voltage!
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 2
Afgelopen 30 dagen: 5
Altijd: 246
1 Opmerking
Yes, checked all wiring and did continuity test from crank and cam sensor connector to ecm connector and checks out ok, thinking it may be the ecm but wanted a second opinion I guess
door crogers_2882