Repareer je spullen Gemeenschap Winkel

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Vragen Bekijk alle

Opties

wifi range very poor after disassembley

Basically i changed my iphone to a white one using one of the kits that are available on ebay, When i finished the install my iphone's wifi wouldn't pick up anything unless it's within 2Ms of the source of the wifi. After a while i took the iphone apart again as the light sensor wasn't working and when i put it back together the wifi was back to normal, I had to take it apart again to replace the home button as it got jammed and now i'm back to the same where the wifi range is extremley poor. What could be the problem?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

8 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

harry there are plenty of people in the same boat.. it would seem the culprit is a screw!

*The answer is one of the screws that screw the logic board to the metal body of the iPhone. In our case it is the one near the camera or the one below below the inner antenna connector, this is most probable but who knows). The screw grounds the board with the antenna!!*

Armald Imeraj, Dec 7 2010 @ 10:47 AM

wi-fi distance was reduced

Wifi very weak after display replacement

Wifi and GPS Problem

Was dit antwoord nuttig?

Ja Nee
Score 4

1 Opmerking:

do we know the exact screw?

door

Voeg een opmerking toe

Opties

Losing the metal clips marked in green is top reason for abnormal Wi-Fi operation after reassembly.

Here are two images, which I shot, that better depict the cause of the issue. Once you lose that piece, you have no option but to order a replacement cover.

Block Image

Block Image

In case they don't here, here's an external link.

Was dit antwoord nuttig?

Ja Nee
Score 4
Voeg een opmerking toe

Opties

I run a company called fixmyiphone and we run into this problem sometimes after taking an iPhone 4 apart. This problem occurs when you touch the wifi cable next to the loud speaker unit (at the bottom of the iPhone). We have found the best way to fix this is to replace the wifi cable, this will sort all your wifi problems out.

Anthony

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

not an answer just a big thanks this has been bugging me for ages now. THANKS......

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

That little piece makes a huge difference, wow!

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

My screw and metal ring are there on the wifi panel, but the wifi range remains to be very very weak. Does anyone have other suggestions?

Thanks

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

works 100 % thanks for the hint

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

Im having the same problem, but im missing a screw near the camera. Is it possible to buy a screw set for the iphone 4??

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Harry zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 19,659