Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2683 Vragen Bekijk alle

Replaced lightning port, but no sound from headphones

I replaced my lightning connector yesterday with new part; everything seems to work except for the headphone jack. The phone recognizes that there’s a headphone plugged in, and the controls work, but no sound comes out.

Even the mic works, so not sure if it’s a bad part or if there’s a bad connections somewhere; any help would be greatly appreciated!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

Solved; ended up being just a defective part; replaced with new component and everything works!

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe
Het nuttigste antwoord

Make sure connection on board side is getting full contacts it will only take 1pin to stop headphones from working.

If after you are encountering the same problem i would swap back your old port temporarily not need to remove full flex just click it in and test headphones.

This will allow you to determine if you have a faulty item.

Was dit antwoord nuttig?

Score 2

2 opmerkingen:

Tried old connector as recommended. The old one works, but the new part doesn't. I'll request a replacement part from ifixit parts shop. Thanks!

door

That's great glad to see you worked it out

door

Voeg een opmerking toe

Maybe check if you soldered it in right,you may of messed up and this is why it does not work.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Count the rings on the headphone plug, 3 rings? 4 rings? try different ‘rings’ headphones.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Jake L zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 170