Rep: 1
1
Hi all,
I just changed a new battery for the macbookpro 2015 early. I found that the new one can't fit the slot very well, for the bottom frame in the middle. It's a little narrower than the gap, so I can't fit it in. Do you have any idea on how to figure out?
Thanks.
In the following image, the top one is the original battery, and bottom is the new one. Note other parts aligned, but the right point not.
Is dit een goede vraag?
Rep: 479,2k
35
329
971
Sounds like you got the wrong battery or a bad copy. Where did you get the battery?
If you can take a picture of both your original battery and your replacement side by side so we can see what is different. You may want to use a ruler to measure them (H-W-D)
Voeg afbeeldingen toe aan een bestaande vraag
Did you follow the IFIXIT guide? MacBook Pro 13" Retina-scherm begin 2015 Vervanging van de batterij
Handleiding
Moeilijkheid:
Zeer eenvoudig
—
2 - 5 minutes
Handleiding
Moeilijkheid:
Moeilijk
—
45 minutes - 2 hours
Was dit antwoord nuttig?
It shows the same model with the original one, and I got it from ifixit. I will measure the length. One thing is that I didn't peel the cover for the adhesive in the back of battery. I am not sure if this affect.
The image is updated. Yes I followed the guide.
@rayfly - Contact IFIXIT using the info on your shipping slip for an exchange. Its possible the battery is defective.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 75
